|
|
Post by Slide on Oct 16, 2010 6:10:40 GMT -5
|
|
|
|
Post by milton on Oct 16, 2010 21:59:10 GMT -5
I downloaded and installed this aircraft to check it out.
The VC does not support gauge backlighhting or lightmaps so our only option is to use the vclight in the lights section of the aircraft.cfg.
I replaced a commented out light with the following for a not-too-bright night light. Try this in your lights section replacing light #7:
light.7=4, -2.10, 0, 0, fx_vclight ,
Hope this helps.
Milton Shupe
|
|
|
|
Post by windrunner on Oct 17, 2010 3:36:52 GMT -5
Very good Milton!
PS: is that a "Blue Angels" skin?
|
|
|
|
Post by Slide on Oct 17, 2010 6:25:20 GMT -5
Lights on!  Click!  Just enough to see what I need to see - perfect! Thank you very much, Milton - that will double my fun with the Provider!  After searching in the panel.cfg I had come across the Lights section in the aircraft.cfg in the meantime and tried replacing Light #4 with a line I took from the default DC-3 but that didn´t work either...  The skin, funny you ask, Damian, is homegrown, I made it back when the Provider was new and it was inspired by Milton´s Howard!   Thanks again!
|
|
|
|
Post by beana51 on Oct 17, 2010 8:08:45 GMT -5
|
|
|
|
Post by milton on Oct 17, 2010 9:13:29 GMT -5
Thanx to Slide for asking,and to Milton for doing....The mission can Now Go On...Thanx much!!  Looks like you forgot to copy the Douglas_DC-3.cab gauges to your panel folder (or the FS9/Gauges folder) |
|
|
|
Post by beana51 on Oct 17, 2010 9:31:25 GMT -5
Thanx milton..been in the dark too long!!.....Vin
|
|
