dennya
Flightsimmer
Denny
Posts: 4
|
Post by dennya on Aug 19, 2005 0:00:40 GMT -5
Bill and Lynn,
Thanks so much for the generous freeware releases!
I'd actually purchased all the FS2004 planes except for the PA-23, so I'm curious... Are there differences in any of these planes from the originals? IE: Any that I should replace my payware planes with?
Thanks!
|
|
|
Post by Kofi on Aug 19, 2005 0:09:57 GMT -5
The freeware ones won't have your nice personalizations that the payware ones have
Kofi/Ed
|
|
|
Post by Roger on Aug 19, 2005 12:44:47 GMT -5
Hi Denny ;D The new free Tri-Pacer seems a little modified from my original.
Roger
|
|
|
Post by jordonj on Aug 19, 2005 23:29:57 GMT -5
How so Roger? Should I install it over my purchased one?
What about the other packages?
|
|
dennya
Flightsimmer
Denny
Posts: 4
|
Post by dennya on Aug 20, 2005 0:53:45 GMT -5
Yep, the Tri-Pacer is definitely different. The original that I bought would start moving on its own at idle, as soon as you released the brake. The power seems toned down on the freeware release. Now I just need to get my original file and replace my personalized graphics. Wonder if any of the others are different? Thanks again, Bill and Lynn!
|
|
|
Post by Roger on Aug 20, 2005 10:34:48 GMT -5
How so Roger? Should I install it over my purchased one? What about the other packages? I'd suggest replacing the air file and the cfg underneath the [fltsim.0] etc.
|
|
|
Post by Bill Lyons on Aug 20, 2005 13:07:30 GMT -5
Hi All, On the Pa22 there are a number of changes in the VC so it would better to also install the mdls from the model folder in the freeware one to the model folders in your original installation. You can direct the freeware installer to a temp folder to get the new mdl files! Hope that helps, Bill
|
|
|
Post by jordonj on Aug 20, 2005 21:33:38 GMT -5
Okay then! Thanks!
By the way, I noticed that there is no barometer reading on the Altimeter....Did I miss something (I replaced the Air Files and the Model Files)...?
Just thought I'd ask
|
|