Post by Deleted on Dec 20, 2007 17:36:48 GMT -5
1. Do a basic install to FSX
Make the exact same changes to the prop texture and panel as for the gear version including the panel.cfg (or copy over the panel folder from the gear version if you have already installed and adapted that for FSX).
2. Make the following edits to the panel.cfg file
Edit 1: to Window00 to change the gear lights and add the water rudder switch
gauge41=Mooney_Bravo!Gear Light, 584,499,42,32
gauge42=Cessna208!Water-Rudder, 555,652,23
Edit 2: to Vcockpit01 for the same reasons
gauge24=Mooney_Bravo!Gear Light, 901,515,55,42
gauge25=737-400!Flaps, 880,411,89,90
gauge26=Cessna208!Water-Rudder, 855,699,41,166
3. Make the following edits to the aircraft.cfg file
Edit 3: in weight_and balance, move the CG back 0.5 feet
empty_weight_CG_position = -0.5, 0, 0
Edit 4: in lights, tweak the vc lights
light.7 = 4, 3.9, -1.35, 2.05, fx_vclight
light.8 = 4, 3.9, 1.35, 2.05, fx_vclight
light.9 = 4, -2.60, 0, 1.05, fx_vclight_maule
NOTE - if you have the gear version, you should do the same edit in that one's cfg file as well.
Edit 5: in contact_points, to get it to perform properly on the water
point.0 = 1, 16.4315, -7.4875, -12.527, 1800, 0, 0.8, 52, 0.3, 2.5, 1, 5, 7, 0, 0, 0
point.1 = 1, 16.4315, 7.4875, -12.527, 1800, 0, 0.8, 52, 0.3, 2.5, 1, 5, 7, 0, 0, 0
point.2 = 1, -3.8309, -7.6999, -11.9194, 1800, 1, 1.2, 0, 0.4, 2.5, 1, 7, 10, 2, 0, 0
point.3 = 1, -3.8309, 7.6999, -11.9194, 1800, 2, 1.2, 0, 0.4, 2.5, 1, 8, 11, 3, 0, 0
point.4 = 4, 16.4315, -7.4875, -10.8957, 2000, 0, 0, 0, 0.85, 2.5, 0.85, 0, 0, 0, 0, 0
point.5 = 4, 16.4315, 7.4875, -10.8957, 2000, 0, 0, 0, 0.85, 2.5, 0.85, 0, 0, 1, 0, 0
point.6 = 4, -3.8309, -7.6999, -9.6408, 2000, 0, 0, 0, 0.95, 2.5, 0.75, 0, 0, 2, 0, 0
point.7 = 4, -3.8309, 7.6999, -9.6408, 2000, 0, 0, 0, 0.95, 2.5, 0.75, 0, 0, 3, 0, 0
point.8 = 5, -15.8027, -7.4678, -12.0, 1600, 0, 0, 50, 0, 0, 1.0, 1.1, 1.5, 0, 0, 0
point.9 = 5, -15.8027, 7.4678, -12.0, 1600, 0, 0, 50, 0, 0, 1.0, 1.1, 1.5, 0, 0, 0
point.10 = 2, 0, -26.6114, -1.4357, 1573.938, 0, 0, 0, 0, 0, 0, 0, 0, 5, 0, 0
point.11 = 2, 0, 26.6073, -1.3821, 1573.938, 0, 0, 0, 0, 0, 0, 0, 0, 6, 0, 0
point.12 = 2, -22.4779, 0, 0.8411, 1573.938, 0, 0, 0, 0, 0, 0, 0, 0, 9, 0, 0
point.13 = 2, 14.1339, 0, -3.0313, 1573.938, 0, 0, 0, 0, 0, 0, 0, 0, 4, 0, 0
Edit 6: in flaps, to get them to work the same as the flap indicator scale
flaps-position.0=0.000, 0.000
flaps-position.1=10.000, 0.000
flaps-position.2=25.000, 0.000
flaps-position.3=40.000, 0.000
If you have the gear version, you should do the same edit in its cfg file as well (it's not essential, but it's just 'nice').
That's it. All finished.
Make the exact same changes to the prop texture and panel as for the gear version including the panel.cfg (or copy over the panel folder from the gear version if you have already installed and adapted that for FSX).
2. Make the following edits to the panel.cfg file
Edit 1: to Window00 to change the gear lights and add the water rudder switch
gauge41=Mooney_Bravo!Gear Light, 584,499,42,32
gauge42=Cessna208!Water-Rudder, 555,652,23
Edit 2: to Vcockpit01 for the same reasons
gauge24=Mooney_Bravo!Gear Light, 901,515,55,42
gauge25=737-400!Flaps, 880,411,89,90
gauge26=Cessna208!Water-Rudder, 855,699,41,166
3. Make the following edits to the aircraft.cfg file
Edit 3: in weight_and balance, move the CG back 0.5 feet
empty_weight_CG_position = -0.5, 0, 0
Edit 4: in lights, tweak the vc lights
light.7 = 4, 3.9, -1.35, 2.05, fx_vclight
light.8 = 4, 3.9, 1.35, 2.05, fx_vclight
light.9 = 4, -2.60, 0, 1.05, fx_vclight_maule
NOTE - if you have the gear version, you should do the same edit in that one's cfg file as well.
Edit 5: in contact_points, to get it to perform properly on the water
point.0 = 1, 16.4315, -7.4875, -12.527, 1800, 0, 0.8, 52, 0.3, 2.5, 1, 5, 7, 0, 0, 0
point.1 = 1, 16.4315, 7.4875, -12.527, 1800, 0, 0.8, 52, 0.3, 2.5, 1, 5, 7, 0, 0, 0
point.2 = 1, -3.8309, -7.6999, -11.9194, 1800, 1, 1.2, 0, 0.4, 2.5, 1, 7, 10, 2, 0, 0
point.3 = 1, -3.8309, 7.6999, -11.9194, 1800, 2, 1.2, 0, 0.4, 2.5, 1, 8, 11, 3, 0, 0
point.4 = 4, 16.4315, -7.4875, -10.8957, 2000, 0, 0, 0, 0.85, 2.5, 0.85, 0, 0, 0, 0, 0
point.5 = 4, 16.4315, 7.4875, -10.8957, 2000, 0, 0, 0, 0.85, 2.5, 0.85, 0, 0, 1, 0, 0
point.6 = 4, -3.8309, -7.6999, -9.6408, 2000, 0, 0, 0, 0.95, 2.5, 0.75, 0, 0, 2, 0, 0
point.7 = 4, -3.8309, 7.6999, -9.6408, 2000, 0, 0, 0, 0.95, 2.5, 0.75, 0, 0, 3, 0, 0
point.8 = 5, -15.8027, -7.4678, -12.0, 1600, 0, 0, 50, 0, 0, 1.0, 1.1, 1.5, 0, 0, 0
point.9 = 5, -15.8027, 7.4678, -12.0, 1600, 0, 0, 50, 0, 0, 1.0, 1.1, 1.5, 0, 0, 0
point.10 = 2, 0, -26.6114, -1.4357, 1573.938, 0, 0, 0, 0, 0, 0, 0, 0, 5, 0, 0
point.11 = 2, 0, 26.6073, -1.3821, 1573.938, 0, 0, 0, 0, 0, 0, 0, 0, 6, 0, 0
point.12 = 2, -22.4779, 0, 0.8411, 1573.938, 0, 0, 0, 0, 0, 0, 0, 0, 9, 0, 0
point.13 = 2, 14.1339, 0, -3.0313, 1573.938, 0, 0, 0, 0, 0, 0, 0, 0, 4, 0, 0
Edit 6: in flaps, to get them to work the same as the flap indicator scale
flaps-position.0=0.000, 0.000
flaps-position.1=10.000, 0.000
flaps-position.2=25.000, 0.000
flaps-position.3=40.000, 0.000
If you have the gear version, you should do the same edit in its cfg file as well (it's not essential, but it's just 'nice').
That's it. All finished.